[vc_column min_height=”” bg_type=”” dima_canvas_style=”” translate_x=”0″ dima_z_index=”0″ delay=”” animate_item=”” delay_duration=”” delay_offset=”” width=”7/12″]
Functions that excavators mainly perform are digging out earth, moving material, road building tasks and preparing the ground. By digging up earth, extracting soil is made easier. Mining operations can run easily and smoothly due to these large machines.
Demag H95
The H95 is a large excavator manufactured by Demag that is often deployed in mining. It is an excavator for material transfer. The machine weighs 100 tonnes and has an engine power of 373 kW. The bucket capacity of the H95 is 6.5 cubic metres. The Demag H95 has, in addition, a transport length of 7.29 metres, a width of 4.65 metres and a height of 5.37 metres. The track width of the machine is 500 mm. The Demag H95 has air-conditioning, quick-change couplings and particulate filter.
Undercarriage parts for your Demag H95
You just started working, and your Demag machine stops working. This is, naturally, really unfortunate, but cannot be prevented. This can, for example, happen when a machine undercarriage part is worn. Fortunately, RTD Mining has sufficient parts that can replace the parts on your machine. These parts can be supplied immediately so that you can again start working quickly.
Do you need undercarriage parts? Contact us for a quote.
[/vc_column][vc_column min_height=”” bg_type=”” dima_canvas_style=”” translate_x=”0″ dima_z_index=”0″ delay=”” animate_item=”” delay_duration=”” delay_offset=”” width=”5/12″]
Mainly large and heavy machines are used in the mining industry. This is neessary because mining areas are basically always difficult to access since they are located in remote places in rough and dusty environments. The large machines that are used in mining such as bulldozers and hydraulic excavators can usually extract no less than hundreds of cubic metres of earth an hour.
